+7(495) 640 21 99
+7(495) 640 22 07

info@boracom.ru

ROLL-FORMING EQUIPMENT:
LSTS, The metal tiles production lines, Profiled sheeting, Metal siding line, Seam roof. Folding machine

Home pageProductionNewsEquipmentAutomationContacts

Coiled metal cross-cutting line K-3

Facade cassettes
FK-1 line
FK-2 line
Adjustable FC line
Subsystems
Metal tile
MONTERREY
CASCADE
DUNA
ADAMANT
ANDALUSIA
HERCULES
Profiled sheeting
C-8 lines
C-10 lines
C-20 lines
C-21 lines
C-44 lines
HC-35 lines
HC-44 lines
H-60 lines
H-75 lines
H-114 lines
Siding lines
Blockhouse 312
Double Blockhouse
Eurobeam
Double Eurobeam
Eurolining
Shiplap
PVC panel
Double ecobeam
Self-contained texturer
Log Cabin
Seam roofing
Folding machine
Snap-Lock
Universal lock seamer
PRK machine
RnP-1 decoiler
Cutting lines
К-4PPr line
К-4 line
К-3 line
К-2 line
К-2P line
К-2Pr line
PRM metal slitting machine
Metal decoiling
Decoiler 10 t
Decoiler 7 t
Decoiler 1,5 t
Recoiler 10 t
Recoiler 7 t
PM-1250 recoiler
Cold forming line
LSTS
Controlled LSTS SETUPS
Non-regulated LSTS lines
Mobile LSTS machine
Universal rolling mill
"URM" Universal rolling mill
Metal fencing
"Euro-type" line
"Barrera" line
"MS-type" line
"W-type" line
"M-type" line
BASIS Series
Flashing line
Rake trim
Rounded ridge cap
Ridge cap
Eave trim
Furring channel
FC-25
FC-30
FC-45
FC-50
FC-61
Metal straightening
Driven straightening machine
Structural profiles
Knauf Drywall profile
Mounting profile
Facade profile systems
Furring channel
Custom profiles
Duct flange production
LSTS profile
Extra equipment
Auxiliaries

 

 

 



Metal slitting lines

Cut-off equipment

PRM metal slitting machine (mobile)

 

K-3 line

Automatic roll decoiler - RS-7M
(Driven, cantilevered)

 

Type - Cantilever with attachable support, with manual blades spreading tool
Weight - 1050 kg
Load capacity - 7000 kg
The decoiler blades spreading mode - Manual by the screw drive
Spreading stroke limit - 480-610 mm
Decoiler drive type - Asynchronous, frequency-controlled by Vesper inverter
Decoiler drive power - 7.5 kW
Metal decoiling speed - 50 m/min
Width of the unwound roll (blanks) - 1250+7 mm
Roll inner diameter - 480-600 mm
Coil outer diameter - 1500 mm
Operating mode - automatic
Loop Tracking - Extension Rod
Emergency sensor for disconnecting the line when the loop is pulled - Limit switch
Overall dimensions (LxBxH) - 2300x1160x1700 mm
Possibility of reverse rotation - provided
The number of the decoiler trunk blades - 3


Cross-cutting Machine K-3

 

Coil loading mode - manual
Working area width - 1250±10 mm
Metal thickness up to - 1.5 mm
Guide table - adjustable, with three non-powered input rolls
A pair of feed rolls - one of them rubberized
Dressing device - 7 rolls
Cutting speed - 20 m/min
Drive type - asynchronous, frequency-controlled
Installed power of the driving motor gear of the guillotine - 3 kW
Diameter of circular knifes - 180 mm
Installed power of the driving motor gear - 4 kW
Cutting accuracy on a length of 3000 mm - ± 1 mm
Control - programmable controller
Material of circular knifes and guillotine blades - ChVG, Ch12MF
Overall dimensions (LxBxH) - 6200x1680x1750 mm
Weight - 2000 kg
Emergency Rope-Stop, with Stop button
Push-button post for loading modes of operation on the guide table - 1 pc.

 


ACS (automated control system)

Quest archive - unlimited

 

Operating modes
Manual - Operation of actuators by pressing buttons
Semi-automatic - operation of the guillotine drive by pressing a button, the rest in automatic mode
Automatic - operation of actuators according to the controller program
Material change mode – line stop and metal cut for waste-free material change
Emergency mode – line stop without resetting the program in case of failure or malfunction of the decoiler, sheet piler or guillotine

Total counter of all processed metal

Number of programmable positions (quantity by length) - 16 pcs

Control panel - Touch 10", multifunctional "DeltaElectronics"

Electrical cabinet - RITTAL

Controller and frequency drives - "DeltaElectronics"


Automatic recoiler- "RSS-7M" with a tensioner (driven, cantilevered))

 

Type – Cantilever with attachable support, with manual blades spreading tool
Weight - 2050 kg
Load capacity - 7500 kg
Blade opening/closing mode - Manual by the screw drive
Band tensioner drive - pneumatic
Number of strip separating plates (standard) - 7 pcs
Recoiler drive type - asynchronous, frequency-controlled inverter "Vesper"
Recoiler drive power - 7.5 kW
Metal recoiling speed - up to 30 m/min
Max. coil width (blanks) - 1250±10 mm
Recoiler inner diameter Min-max - 500-600 mm
Coils outer diameter - 1300 mm
Operating mode - automatic
Loop tracking - Extension Rod
Emergency sensor for disconnecting the line when the loop is pulled - Limit switch
Overall dimensions (LxBxH) - 2300x2700x1300
Possibility of reverse rotation (in the opposite direction) - provided
The number of recoiler trunk blades- 4 pcs.

 


Automatic Finished Sheet Piler

 

Sheet piler Control System – Programmable Controller
Pick-up feeder drive "SITI" - 0.75 kW
Operating mode - Automatic
Manual - push-button
Sensors for tracking the position of the pick-up feeder - Non-contact inductive
Sheet piler length - 3 l.m.
Receiving cart - 3 l.m.

 




The automated slitting line K-3 allows cutting coiled metal up to 1.5 mm thick.

Cutting can be carried out in the slitting mode on the strip, transversely on sheets of a given length, or cross-cutting on bands of a given length and width.

The equipment can be manufactured as a slitting line or a cut to length line.

The lines can be equipped with decoilers with a lifting capacity of 7 or 10 tons at the customer's choice.

The slitting machine consists of a feeding table, a dressing unit for the original metal, slitting cutters unit, a guillotine for a cross cut, a catching device for sheets and a recoiler for strips cut. The dressing device consists of 7 - 11 rolls, depending on the requirements for flatness. After dressing, the metal enters the slitting unit. Cutters can be with or without polyurethane rings. The K-3 line is equipped with a hydraulic guillotine for cutting-off of metal into sheets. Catching devices are offered based on customer requirements.

The product range catching tables includes the following types: standard catching table, catching table with ejector, catching table with ejector and sheet closer (for painted metal), hydraulic catching table with the function of lowering as the pack accumulates.

Slitted strip recoiler “RSS-7M” with a tensioning device as standard, with a lifting capacity of 7 tons, with an attachable support, with manual blades spreading tool.

It is possible to equip the slitting line with the SRG-10 recoiler (driven, cantilevered) with an unloading cart, with hydraulic blades spreading tool, with a load capacity of 10 tons. "SRG-10" is equipped with an unloading hydraulic cart with a displacement drive.

The slitting line for coiled metal K-3 has been produced by our company for more than 15 years. During this time, the components and assemblies of the metal slitting line have been refined and improved. Today coil cutting equipment by BORA is reliable, modern, and meets European standards.

 

THE EQUIPMENT SET COST:

Depends on the package you choose.

 

Send us the completed questionnaire to receive an individual quotation