+7(495) 640 21 99
+7(495) 640 22 07

info@boracom.ru

ROLL-FORMING EQUIPMENT:
LSTS, The metal tiles production lines, Profiled sheeting, Metal siding line, Seam roof. Folding machine

Home pageProductionNewsEquipmentAutomationContacts

Siding lines

Facade cassettes
FK-1 line
FK-2 line
Adjustable FC line
Subsystems
Metal tile
MONTERREY
CASCADE
DUNA
ADAMANT
ANDALUSIA
HERCULES
Profiled sheeting
C-8 lines
C-10 lines
C-20 lines
C-21 lines
C-44 lines
HC-35 lines
HC-44 lines
H-60 lines
H-75 lines
H-114 lines
Siding lines
Blockhouse 312
Double Blockhouse
Eurobeam
Double Eurobeam
Eurolining
Shiplap
PVC panel
Double ecobeam
Self-contained texturer
Log Cabin
Seam roofing
Folding machine
Snap-Lock
Universal lock seamer
PRK machine
RnP-1 decoiler
Cutting lines
К-4PPr line
К-4 line
К-3 line
К-2 line
К-2P line
К-2Pr line
PRM metal slitting machine
Metal decoiling
Decoiler 10 t
Decoiler 7 t
Decoiler 1,5 t
Recoiler 10 t
Recoiler 7 t
PM-1250 recoiler
Cold forming line
LSTS
Controlled LSTS SETUPS
Non-regulated LSTS lines
Mobile LSTS machine
Universal rolling mill
"URM" Universal rolling mill
Metal fencing
"Euro-type" line
"Barrera" line
"MS-type" line
"W-type" line
"M-type" line
BASIS Series
Flashing line
Rake trim
Rounded ridge cap
Ridge cap
Eave trim
Furring channel
FC-25
FC-30
FC-45
FC-50
FC-61
Metal straightening
Driven straightening machine
Structural profiles
Knauf Drywall profile
Mounting profile
Facade profile systems
Furring channel
Custom profiles
Duct flange production
LSTS profile
Extra equipment
Auxiliaries




Siding lines

 

Metal siding machine

BORA Group offers modern metal siding lines - high-performance automated equipment for the production of facade finishing materials for the needs of low-rise and industrial construction.

Our company was one of the first in the Russian Federation to start production of such serial equipment, including machines for the production of a double blockhouse, metal imitation of double and simple eurobeams, eurolining, shiplap and PVC panels.

 

 

Станок металлосайдинга
Линии металлосайдинга
Оборудование для металлосайдинга
Устройство нанесения текстуры на металл

 

 

 

 

Today, metal siding is one of the most popular materials for facade decoration: it is relatively cheap, durable, easy to install and clean. At the same time, its aesthetic merits are undoubted: all of the named materials very accurately reproduce the color and texture of natural wood materials, such as shiplap, eurolining, simple and double eurobeam, etc.
 
The list of products of our company also includes lines for the production of PVC panels. As a raw material, thin-sheet (0.4 - 0.7 mm) galvanized steel with a decorative coating is used.
BORA equipment can produce PVC panels of various widths - by equipping carriages with the ability to regulate the width of rolled products (from 100 to 300 mm).

For the metal siding production lines, a two-tier version is available; It is also possible to include devices for applying ventilation perforations in the line. The lines are designed to work with metal 0.45 - 0.7 mm.

It is possible to equip metal siding lines with a special rotor that applies a 3D pattern to the front surface of the panel. Such a pattern exactly imitates the texture of wood, creating the effect of a natural finishing material. The performance characteristics of siding, double blockhouse and eurobeam, produced on our equipment, are significantly improved due to the better geometry of the profiles.

 

 

DECORATIVE RAGGING DEVICE

A device for volumetric ragging of a decorative pattern that repeats the structure of a wooden surface has been developed and put into production. This device can be manufactured as a separate module. The stand-alone embossing device "wood structure" allows you to cold roll to form a 3D pattern on thin sheet steel coils or preforms with a polymer coating.

The device for ragging the "Wood" pattern has the nomenclature of the Decorative Ragging Device (DRD), it is produced for a certain width of the metal band, and allows you to apply a pattern on any strip width up to the maximum possible, determined by the customer of the equipment. Using DRD, the siding manufacturer has the opportunity to make this ragging on all types of metal siding without the need to equip each production line with a stationary built-in stand.

The device includes:

- Input guide table – adjustable
- Drive unit for band ragging with a pair of working rolls for embossing
- Output support table
- Electric base on wheels to move the device
- Electrical control cabinet
- Drive control rod


 

features of the metal siding machines by bora

Our company has solid experience in the development of original projects of this type  equipment – more than 120 units of metal siding lines and machines have already been produced and successfully operated.

- the geometric characteristics of the profile ensure its quick and easy installation;
- the line includes an increased number of profiling stands - due to which at the output we have a clearly consistent profile geometry of all the named types of facade materials;
- metal with a thickness of 0.4-0.7 mm and different physical characteristics is suitable as a raw material - at the same time, all rolling equipment can work without additional settings;
- the cutters included in the lines guarantee exceptional cutting accuracy - and hence the clarity of the geometry of finished products and the ease of their installation.

All production lines, including block house equipment, are assembled from components and parts from the best foreign manufacturers. Our equipment is designed for long-term operation in stable high load mode.

The ACS that our equipment is equipped with have advanced functionality. They are able to create and maintain a permanent archive of tasks, and have information exchange with the main server.