 |
 |
 |
 |
+7(495) 640 21 99
+7(495) 640 22 07
+7(495) 640 21 99
+7(495) 640 22 07
 |
The self-contained brushed wood embossing device allows cold rolling to form a 3-D pattern on pre-painted thin sheet steel.
The ragging on a metal band with the applied protective film is provided. The device is installed in front of any siding line, a line of additional elements, a picket fence, it is also possible to roll piece blanks in manual mode, the working area is up to 420 mm. |
- Input guide table - adjustable
- Drive unit for band ragging with a pair of working rolls for embossing
- Output support table
- Electric base on wheels to move the device
- Electrical control cabinet
- Drive control rod
Ragging speed - 8 - 24 m/min (adjustable)
Drive - asynchronous, frequency-controlled
Roll drive - chain and gear
Installed power of the motor gear - 4 kW
Forming rolls - heat-strengthened 56-58 HRC.
Roll convergence indicators (2 pcs) with metric scale
Coil loading mode - manual
Working area width up to 420 mm
Overall dimensions (LxBxH) - 1500 x900x1500 mm
Weight - 450 kg
Loading - drive operation by pressing buttons
Reversible - drive operation by pressing buttons
Automatic - drive operation according to the position of the control rod (by sagging of the metal loop)
|
|
|
|
Rolled thin sheet cold-rolled hot-dip galvanized with a polymer coating from continuous lines (zinc paint coat), in coils, GOST 34180-2017, 0.35-0.50 mm thick.
- Galvanized steel of the Yu, KhP, PK group - according to GOST 14918-2020, or
- Galvanized steel grades 220, 250, 280, according to GOST R 52246-2016
It is allowed to use similar rolled products obtained by import, the quality and mechanical properties of which comply with the requirements of the relevant regulatory documents.
| Moscow region, Krasnogorsk, Pavshinsky Boulevard, 17 |
Contacts | |
|
Fl22-design studio |