AUTOMATED ROLL-FORMING "PS-100" SETUP
It is designed for the production of C-shaped channels 100 mm high with perforation of assembly, mounting and communication holes.
Purpose: production of roof truss structures and ceilings, frames of internal partitions and external walls.
Application: Construction of low-rise housing and outbuildings.
Compound:
1. Driven decoiler, cantilever type for a metal coil with a width up to 450 mm and weighing up to 1.5 tons.
2. Hole piercing press (7 sets 1 spare) with hydraulic drive. The actuating devices of the die set are made with hydraulic drives, controlled by software
(1) for anchor bolts - ø 12.5, along the channel axis
(2) for communications - ø 52 mm. along the channel axis
(3) Rack through cutout
(4) Rack shelf cutout
(5) Recess and 4 mounting holes
(6) Die-cut semi-circular ends for trusses.
(7) Depression without holes
(8) One spare seat
3. A device for marking the channel (logo laying on and assembly number). The marking device marks the channel according to the CNC code.
4. Rolling mill with shaping rolls.
Readjustment for a different metal thickness is carried out manually using a device with a metric scale.
5. General device for crimping the ends of the rack channel (hydraulic).
6. Cutting guillotine (hydraulic).
7. Automatic control system.
The CNC control data is formed by the specialized design program Boracad, which generates the specification. The total power consumption is 18 kW.
Type of metal used:
Coiled thin sheet galvanized in accordance with GOST R 52246-2016
Ϭ 0.2 = 220 - 350 N/mm2
The thickness of the metal is 0.8-1.5 mm
The overall heights range of the channel is from 80 - 100 mm. (optional)
When ordering equipment, the shaping and punching tool is mounted according to the size specified by the customer from the proposed list.